Step 7: Setting the IP Address
21
===========================================
CId Port Type
IP
Mask
Gateway
Link
===========================================
1 1
Mgmt 192.168.10.87 255.255.255.0 192.168.10.1 Up
1 1
iSCSI 192.168.10.88 255.255.255.0 192.168.10.1 Up
1 2
iSCSI 10.0.10.2
255.0.0.0
0.0.0.0
Down
6.
Repeat steps 3 and 4 to set the other iSCSI port. Use
-p 2
in place of
-p 1
.
To see the full set of CLI commands, at the admin@cli> prompt, type
help
and
press Enter.
This completes the Management and iSCSI Port setup. Go to “Step 8: Creating
Disk Arrays with WebPAM PROe” on page 24.