21
Chapter 3: Management
This chapter covers the following topics:
•
LEDs (below)
•
When attached to a VessRAID subsystem, you can manage the VessJBOD
expansion unit using WebPAM PROe or the Command Line Utility (CLU). See
the
VessRAID Product Manual
for more information.
This chapter describes monitoring and management functions directly from the
VessJBOD expansion unit through its Command Line Interface (CLI).
LEDs
Front Panel LEDs
When boot-up is finished and the VessJBOD expansion unit is functioning
normally:
•
Power and Global Enclosure Status LEDs display green continuously.
•
I/O Module Activity LED flashes green when there is controller activity.
•
System Heartbeat LED blinks green once per second.
Figure 1. VessJBOD front panel LED display
See the table on the next page.
Power
I/O Module Activity
Global Enclosure Status
Reserved
Reserved
System Heartbeat
