Promise Technology Vess A3340 Product Manual Download Page 94

Page: 94 / 241

oftwAre

AnAgeMent

(clu)

Software Management includes the following functions:

•

“Email Settings (CLU)” on page 83

•

“Web Server Settings (CLU)” on page 84

Email Settings (CLU)

By default, Email service is set to Automatic and its normal status is Started.

To make Email service settings:

Main Menu

Additional Info and Management

Software Management

Email

>> Startup Type

2. Press the spacebar to toggle between

Automatic

and

Manual

3. Highlight the following and press the backspace key to erase the current value, then type the

new value:

•

SMTP server IP address or server name

•

Server Port number (25 is the default)

4. Highlight

Authentication

and press the spacebar to toggle between

Yes

and

If you selected Yes, type in a User name and Password in the fields provided.

5. The following items are optional but recommended. Highlight and press the backspace key to

erase the current value, then type the new value:

•

Sender’s email address

•

Subject Line for the email message

6. Press

Control-A

to save your settings.

To start, stop or restart the Email service, highlight

Start

Stop

Restart

and press

Enter

Managing with CLU

Vess A3340 Product Manual

Summary of Contents for Vess A3340

















































































































































































































































Search results

Summary of Contents for Vess A3340

Reviews:

Related manuals for Vess A3340

Brands by name

Popular brands

Promise Technology Vess A3340, Product Manual

Search results

Summary of Contents for Vess A3340

Reviews:

Related manuals for Vess A3340

Brands by name

Popular brands