Promise Technology Vess A3340 Product Manual Download Page 139

Page: 139 / 241

128

Vess A Class NVR Storage Appliance

Promise Technology

nclosures

The Enclosure menus are used to provide information for and monitor the status about the various

components of the enclosure unit.

Click on a specific enclosure in Tree view or in the Enclosures list to display

information or settings menus for an enclosure. See the following sections:

•

“Enclosure Information”

•

“Enclosure temperature sensor settings”

•

“Buzzer Settings”

•

“Physical Drives”

ocate

enclosure

To locate an enclosure in the list, click the Locate button. The LED indicators on the front panel of the

enclosure will blink for one minute.

ncloSure

nFormatIon

The Enclosure Information read-only display menu provides key real-time information about current hardware

status of the enclosure. Click on the expanders buttons to reveal current conditions and status of the enclosure,

power supplies, fans, blowers, temperature sensors and voltage sensors. Move the cursor over the icons in the

virtual enclosure displayed at the top of the menu to see current status and relevant conditional statistics for the

fans, power supplies, and temperature sensors.

Summary of Contents for Vess A3340

















































































































































































































































Search results

Summary of Contents for Vess A3340

Reviews:

Related manuals for Vess A3340

Brands by name

Popular brands

Promise Technology Vess A3340, Product Manual

Search results

Summary of Contents for Vess A3340

Reviews:

Related manuals for Vess A3340

Brands by name

Popular brands