Promise Technology VES0709 Product Manual Download Page 26

Page: 26 / 69

roMIse

anageMent

guI

This chapter describes using Promise Management GUI to monitor and manage your RAID system.

ogging

into

romise

anagement

gUi

You can log into Promise Management GUI in either of two ways:

•

“Logging in at the Enclosure” on page 13

•

“Logging in over the Network” on page 14

ogging

thE

ncLosurE

At the Vess A8020 enclosure to log into Promise Management GUI, do one of the following actions:

•

Double-click the Promise Management GUI desktop icon.

•

Choose Promise Management GUI in the Windows Programs menu.

•

Follow the steps under “Logging in over the Network” on page 14.

Note

The default IP settings for the Gigabit Ethernet ports are:
Port 1 = 192.168.0.1
Port 2 = 192.168.1.1

IP settings for the ports are controlled by the OS. Use the normal IP

settings configuration procedure for the OS you are using if you want

to change the default settings.

Promise Technology

Product Manual

Summary of Contents for VES0709





































































Search results

Summary of Contents for VES0709

Reviews:

Related manuals for VES0709

Brands by name

Popular brands

Promise Technology VES0709, Product Manual

Search results

Summary of Contents for VES0709

Reviews:

Related manuals for VES0709

Brands by name

Popular brands