Promise Technology PegasusPro R8 Product Manual Download Page 30

Page: 30 / 78

HDD Replacement

PegasusPro Product Manual

Cautions

Swing open the drive carrier handle before you insert the drive carrier

into the enclosure.

To avoid hand contact with an electrical hazard, remove only one drive

carrier a time.

1. Press the drive carrier release button.

Grasp the handle between thumb and finger, gently pull the empty drive carrier out of the

enclosure.

Carefully lay the drive into the carrier with the power and data connectors facing away from the

carrier handle.

Removing the Drive Carrier

The drive carrier accommodates 2.5-inch and 3.5-inch drives.

Hdd r

eplacement

PegasusPro models are shipped with Hard Disk Drives (HDD) installed, so it will not be necessary to install new

drives in order to use the device. If it is necessary to change a drive, follow the instructions in this section. It is best to

have identical HDD in all bays, or at least identical specifications for capacity and speed. Go to PROMISE Support

online to find a list of compatible HDD for the PegasusPro Series.

Drive carrier front view

Carrier release button

Summary of Contents for PegasusPro R8














































































Search results

Summary of Contents for PegasusPro R8

Reviews:

Related manuals for PegasusPro R8

Brands by name

Popular brands

Promise Technology PegasusPro R8, Product Manual

Search results

Summary of Contents for PegasusPro R8

Reviews:

Related manuals for PegasusPro R8

Brands by name

Popular brands