Promise Technology Pegasus3 R4 Product Manual Download Page 14

Page: 14 / 232

Introduction

Pegasus3 Product Manual

ntroductIon

egasus

This chapter covers the following topics:

•

•

•

•

PROMISE Technology’s Pegasus3 R8, R6 and R4 are direct attached storage (DAS) solutions for

external storage targeted for small and medium business (SMB) users, small office / home office

(SOHO) users, and digital Audio and Video production professionals.

Pegasus3 models (R4, R6, R8) are operationally compatible with the original release Pegasus R4 and

R6 models. Use the latest version of the Pegasus Utility to monitor the Pegasus3 status and perform

maintenance and management functions. The latest version of the Pegasus Utility can also be used for

the original release of Pegasus and Pegasus2.

ackIng

Ist

Check the shipping package to make sure you have the following items:

•

Pegasus3 R4, Pegasus3 R6 or Pegasus3 R8

•

Hard disk drives (four in R4, six in R6, eight in R8)

•

Quick Start Guide

•

Thunderbolt 3 cable

•

Power cord

Summary of Contents for Pegasus3 R4








































































































































































































































Search results

Summary of Contents for Pegasus3 R4

Reviews:

Promise Technology Pegasus3 R4, Product Manual, Page: 14 / 232

Search results

Summary of Contents for Pegasus3 R4

Reviews: