Promise Technology Pegasus R4i Product Manual Download Page 154

Page: 154 / 163

143

Troubleshooting

Pegasus R4i Product Manual

Subsystem Problems

Subsystem problem troubleshooting includes:

•

“Diagnosing a Subsystem Problem”

Diagnosing a Subsystem Problem

Check System Status on the Dashboard tab. If a yellow !

or red X appears in the System

Status box:

1. Click the name link of the component with the red X

icon.

System Status box on the Dashboard

The System Status list contains a list of all the components with their appending status. In case there is

a failure with one of the components, an indicator icon will be displayed next to the component.

2. For physical drives, disk arrays, logical drives, and spare drives, mouse-over the component with

the red X

icon and click the

View

button.

Summary of Contents for Pegasus R4i



































































































































































Search results

Summary of Contents for Pegasus R4i

Reviews:

Promise Technology Pegasus R4i, Product Manual, Page: 154 / 163

Search results

Summary of Contents for Pegasus R4i

Reviews: