Promise Technology FastTrak TX2000 User Manual Download Page 34 | Manualshive

Page: 34 / 70

background image

FastTrak TX2000™ Series User Manual

30

Installing Drivers

This section details the FastTrak TX2000 driver installation when used with various operating
systems. The software includes the driver necessary to identify FastTrak TX2000 to the
operating system.

Windows XP

Installing Driver During New Windows XP Installation

1. Start

the

installation:

a.

Floppy Install: Boot the computer with the Windows XP installation
diskettes.

b. Floppyless Install: Boot from floppy and type “WINNT”. After files have

been copied, the system will reboot. On the reboot, press <F6> after the
message “Setup is inspecting your computer’s hardware configuration...”
appears.

c.

CD-ROM Install: Boot from the CD-ROM. Press <F6> after the message
“Press F6 if you need to install third party SCSI or RAID driver” appears.

2. When the “Windows XP Setup” window is generated, press “S” to Specify an

Additional Device(s)

3. Insert the Promise Technology



driver diskette into drive A: and press “Enter” key.

4. Choose “WinXP Promise FastTrak TX2000 (tm) Series Controller” from the list that

appears on screen, and then press the “Enter” key.

5. Press “S” to use the driver on the floppy disk, and then press “enter” to continue with

installation.

6.

The Windows XP Setup screen will appear again saying “Setup will load support for
the following mass storage devices:” The list will include “WinXP Promise FastTrak
TX2000 (tm) Series Controller”.

NOTE

: If you need to specify any additional devices to be installed, do so at this time.

Once all devices are specified, continue to the next step –

7.

From the Windows XP Setup screen, press the Enter key. Setup will now load all
device files and then continue the Windows XP installation.

«
...
32
33
34
35
36
...
»

Summary of Contents for FastTrak TX2000







































































Reviews:

No comments

Related manuals for FastTrak TX2000

Brand: Rastergraf Pages: 169

MIPort Universal PCI Cards 3PCIOU1

Brand: B&B Electronics Pages: 92

NetAgentW DW811

Brand: MegaTec Pages: 4

Brand: West Mountain Pro Pages: 36

Brand: M-Audio Pages: 58

GeForce GTX 580 Classified Hydro Copper 3072MB

Brand: EVGA Pages: 1

NVIDIA GeForce PX8000

Brand: Jaton Pages: 42

Digitizer Capture Card - PCI RGB

Brand: NCast Pages: 10

VideoMate Vista E500F

Brand: COMPRO Pages: 32

Brand: Fcar Pages: 12

Brand: Hama Pages: 28

Parallel-PCIe/LP

Brand: Lava Pages: 1

Brand: Kimaldi Pages: 30

Brand: ADLINK Technology Pages: 60

Brand: EMS Imaging Pages: 8

Brand: United Electronic Industries Pages: 20

CSN SELECT AYC-H6355

Brand: Rosslare Pages: 64

Brand: Sonifex Pages: 24

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands