ProMinent Ultromat ULFa 1000, Assembly And Operating Instructions Manual

Page: 60 / 88

The parameters [Powder/Liquid concentration] can be used
to adjust the concentration of the prepared polymer solution
set in the Ultromat. The parameter [Liquid active ingredient]
specifies how high the content of the active ingredient is in
the liquid polymer.
Liquid active ingredient
The liquid polymers are provided with different active ingredi‐
ents. If the active ingredient content of the powder is 100 %,
then the active ingredient fraction of the liquid polymer is
generally in a range below 50 % (typically 40 %).
In practice it is generally desirable to use the same concen‐
trations settings with the liquid polymer as for the powder
product. Therefore the concentration of active ingredient in
the liquid polymer (typically 40 %) is entered in the control.
10.5 Information
10.5.1 Ultromat Identity code
Menu Archive Reset Mode
A0790
Unit Stop
Identcode
Identcode Version
Type Size
Doubledecker
Pendulum
Continues
Polymer
Powder feeder
Options
3. Stirrer
Wetting cone
Vibrator
Flow monitor
Float switch
Profibus
Fig. 36: Ultromat Identity code
By pressing F2 [MENU] > [INFO] you can access the [Identcode] screen.
Here you can read-off with which features the Ultromat is equipped.
Feature Note
3. Stirrer This option means the Ultromat has a stirrer in chamber 3.
Wetting cone The wetting cone should improve the mixing of polymer and water.
Vibrator Only in the
‘dry feeder’
version. The vibrator is to improve the sliding down of the pol‐
ymer.
Flow monitor Only in the
‘Spectra (FC)’
version. Monitors the flow of liquid concentrate in the line.
Operating Menu [F2]
60