manualshive.com logo in svg

ProMinent Duodos 100 PPS, Assembly And Operating Instructions Manual

Share
Download
ProMinent Duodos 100 PPS Assembly And Operating Instructions Manual Download Page 13

max. 7 bar

Compressed air remote outlet

Optional

Optional

Optional

Liquid 

inlet

Outlet of 

drainage valve

Compressed air

Compressed air remote outlet

A2739

Fig. 1: Recommended installation with a compressed air remote outlet as an option

Connect a hose to the new outlet opening and install the silencer

on the end of the hose. Use a hose with the same diameter as the

diameter of the outlet opening 3/8” NPT.
An optional kit is needed for the compressed air remote outlet.
1.

Uncover the compressed air outlet opening of the pump.

Use a hose with the same diameter as the diam‐

eter of the outlet opening.

2.

Connect a hose to the new outlet opening.

3.

Install the silencer at the end of the hose.

4.

Position the end of the hose with the silencer at a suitable

place, e.g. in a protective casing.

Compressed air remote outlet with

silencer

Assembly

 

 

 

13

Summary of Contents for Duodos 100 PPS









































Reviews:

No comments

Brands by name

Popular brands

Load more brands