ProMinent DULCODOS Ammonia, Operating Instructions Manual, Page: 17 / 52

8 Assembly
WARNING!
Warning of hazardous ammonia
Ammonia can escape if the system is not handled
correctly.
– Store and transport the metering system in its
original packaging. Take special precautions to
ensure that the metering system is protected
against mechanical damage
– Select a suitable installation site for the
ammonia water metering system.
WARNING!
Danger of severe eye injuries
Immediately rinse the eyes in the event of
ammonia coming into contact with them.
– Provide an eye shower (with water connection)
directly adjacent to the installation site.
WARNING!
Warning of explosive atmospheres
An explosive air-ammonia mixture can form with
high concentrations of ammonia water – particu‐
larly above 15% w/w – or also at high ambient tem‐
peratures (at over 30 °C above 10% w/w).
– Note the current regulations and technical reg‐
ulations dealing with ammonia and ensure ade‐
quate ventilation.
CAUTION!
Observe the material safety data sheet
Observe the current material safety data sheet for
ammonia water.
The following must be available at the installation site:
n
Water connector with eye shower (refer to the material safety
data sheet)
n
Water connector for deionised water (dilution water and rinsing
water). Properties - refer to "Technical data" chapter
n
Prevent the installation site from unauthorised access.
n
Mains connection 230 V / 50 Hz for the system.
n
An appropriate exhaust air duct for an exhaust air line from the
chemical vapour lock.
n
Recommendation: There needs to be a gas detector fitted
n
brick or masonry, leak-tight tray provided on site around the
installation site or a collecting pan with ribs on the inside (on
request).
n
A horizontal, level and stable surface must be available for the
installation.
Safety information
Requirements for the installation site
Assembly
17