6
ASSEMBLY INSTRUCTIONS
Tab
Slot
Downrod
Mounting
Bracket
Black (Hot)
Wire Connector
White (Neutral)
Bare/Green (Ground)
Black
Blue
White
Green
Mounting
Bracket
Screw
L-shaped Slot
Round Hole
Mounting
Bracket
7
5
6
5. Install the ball end of the downrod into opening in the
mounting bracket. Align one of the slots in the downrod
with the tab in the mounting bracket. The downrod
should not rotate in the mounting bracket if installed
properly.
DANGER:
Failure to align the slot in the ball with tab may
cause the fan to fall, resulting in serious injury or death.
6. Connect household supply and fan wires according to
the diagram and these steps:
• Connect the Green wire from the downrod and mounting
bracket to the Bare/Green supply wire.
• Connect the White wire from the fan to the White supply
wire.
• Connect the Black and Blue wires from the fan to the
Black supply wire.
• Secure all wiring connections together with wire
connectors.
Note:
If a second hot power wire is available from the
outlet box, connect it to the blue (light power) fan wire for
separate fan and light switches.
Important:
After the connections have been made, the
wires should be turned upward and pushed carefully
up into the outlet box. Place the black and white wire
connections on opposite sides of the outlet box.
8. Align the two holes of the blade assembly over two
holes on the motor assembly. Insert two of the previously
removed motor screws through the holes in the blade
assembly and tighten the motor screws securely. Repeat
with the other two blade assemblies, making sure to
completely secure each blade assembly before moving to
the next.
To install an optional light kit with this fan, proceed to
page 8.
7. Raise the canopy, ensuring that the two mounting
bracket screws are aligned with the L-shaped slots in
the canopy. Then turn the canopy clockwise until the
mounting bracket screws are completely engaged in
the L-shaped slots. Install the two previously removed
mounting bracket screws and star washers in the round
holes. Securely tighten all mounting bracket screws.
8
Motor
Screw