Setting an Access Password (Security Lock)
You can use the four (arrow) buttons to set a password and prevent unauthorized use of the projector.
When enabled, the password must be entered after you power on the projector. (See
Navigating the
OSD
on page 14 and
Setting the OSD Language
on page 15 for help on using OSD menus.)
Important:
Keep the password in a safe place. Without the password, you will not be able to use the projector.
If you lose the password, contact your reseller for information on clearing the password.
1.
Press the
MENU
button to open the
OSD menu.
2.
Press the cursor
◄►
button to move
to the
Installation I
menu.
3.
Press the cursor
▲▼
button to select
Advanced
.
Promethean, Company Confidential
10
