promethean TP-1982-ML-V03, Installation And User Manual, Page: 5 / 64

Safety Information
Environmental Considerations
Temperature: Humidity:
Operating 0°C to 40°C Operating 20% to 80%
Storage -20°C to 60°C Storage 10% to 90%
For further information and support about the installation and safe use of this product, please contact your
local Promethean reseller or visit Promethean Support at:
www.prometheankb.com or
support.prometheanworld.com
Assembled board weight not to exceed 51kg
CAUTION - Advise two man lift
CAUTION - This product utilises a laser.
CAUTION - Use of control or adjustments or performance of procedures other than those specified herein
may result in hazardous radiation exposure!
Do not open covers and do not repair yourself. Refer servicing to an authorised Promethean service agent.
This product MUST be mounted to a building structure before use.
The installation work should be performed by a qualified installer. Attempting to install the product without
the relevant experience is done so at your own risk. Incorrect or incomplete installation could result in
personal injury, property damage or product failure. The System must be installed using all of the fixing
brackets in the correct position, and with fasteners and fixings appropriate to the wall type.
The device is not field serviceable, nor is it intended to be serviced by dealers and/or distributors.
Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to laser Notice No. 50 dated June
24, 2007.
The Laser is an Infrared Pulsed Diode Laser operating at:
Emitted wavelength. 905nm
Beam divergence 40 x 10 degrees (FWHM)
Pulse durations. Maximum 130us
Repetition rate Maximum 83Hz
Maximum output or energy output. Peak output 3.4W
ActivWall Install & User Guide 5