Promethean, Company Confidential
10
Starting and Shutting down the Projector
1.
Connect the power cord to the projector.
Connect the other end to a wall outlet.
The
POWER
LED on the projector
light.
2.
Turn on the connected devices.
3.
Ensure the
POWER
LED displays a
solid green. Then press the
POWER
button
of the remote
to turn on the pro-
jector.
The projector splash screen displays and
connected devices are detected.
See
Setting an Access Password
(Security Lock)
on page 11 if security
lock is enabled.
4.
If more than one input device is con-
nected, press the
SOURCE
button
of
the remote
and use
▲▼ to scroll
among devices.
(Component is supported through the
RGB to COMPONENT ADAPTER.)
•
VGA 1/VGA 2: Analog RGB
Component: DVD input YCbCr / YPbPr, or
HDTV input YPbPr via HD15 connector
•
Composite Video: Traditional composite video
•
S-Video: Super video (Y/C separated)
•
HDMI: HDMI, DVI
5.
When the “Power Off? /Press Power
again” message appears, press the
POWER
button. The projector turns
off.
Caution:
Do not unplug the power cord until the POWER LED stops flashing – Indicating the projector has
cooled down.
