AC Electronics Replacement Guide
© Promethean Ltd.
Remove the two cables from the side of the
e
lectronics box on the back of the
ActivB
oard.
﹙ ﹚
Note: e ActivBoard electronics are located behind the top left hand corner of the board as viewed
from the front. In order to replace the electronics, you will need access to this location.
You will also need a small Pozi type screwdriver to replace the electronics.
Before beginning the process below, ensure that your computer and/or ActivBoard
S
ystem has
been powered down correctly, and is no longer connected to the mains power supply, or to the
computer via the USB cable.
ATTENTION
Observe precautions for handling ELECTROSTATIC DISCHARGE SENSITIVE DEVICES.
Remove the USB cable (and the DC Power
cable if using
ActivBoard
Pro) from the
underside of the electronics.
