- 12 -
Adjusting the buttonhole’s right forward stitching width
Standard
•
The width of the buttonhole’s right forward stitching should appear identical to that of the left backward
stitching. (The difference should be less than 0.2 mm.)
Adjustment
1. Install the darning plate onto the needle plate and lower the presser foot onto a piece of paper.
2. Set the pattern selection dial to b.
3. Turn the balance wheel until the needle contacts the paper.
4. Set the pattern selection dial to d.
5. Turn the balance wheel until the needle contacts the paper.
6. Using a screwdriver, turn the adjusting screw to change the stitch width of the right side.
Note: Turn the adjusting screw to the right to make the stitch width of the right side more narrow.
www.promelectroavtomat.ru
