E. 3/8-16 Standard Mounting Thread
E. Ball Friction Knob
Repositioning of the Panning Knob
Repositionable Panning Knob of BH50 makes it a unique Ball head.
1. Locate the two screws as in image above on the left.
2. Remove them using 5/32" Hex Key (center image) counter-clockwise.
3. Reposition Knob (rotate the base ring) to your liking (right image).
4. Align threaded holes with openings in base and re-insert screws, careful
do not overtighten, just moderate torque is required to get screws seated.
Panning Knob - repositioned to desired position