Promeba PC-650, User Manual

Page: 15 / 46

15
USER GUIDE // STRETCHER PC-650
Revisión 02/20
03
OPERATION
03.4 Tensors
To adjust the tension in the drive cables, the stretcher has
three sets of tensors for its regulation:
1. REAR UNLOCKING LEVER
2. FRONT LEGS UNLOCKING LEVER
3. HOLDING POSITION LEVER
To regulate the tensioners, you have a clamping flange
where you can replace the tensioning cable (if it breaks) or
regulate its tension.
To adjust the tension of the cable has two locknuts (D).
Using a wrench 11 loosen the nut 2 and adjust the tension
of the cable using the nut 1. Tighten the nuts 1 and 2 again.
If the cable breaks, proceed to cut the cap, loosen the screws
(A-B) and remove the cable pulling from the handle terminal
(C).
1
2
3
1
2
3
A
B
C
D
2
1