USER GUIDE //
STRETCHER SUPPORT PB-420 SERIES
Review 01/15
11
02.1
Transport and unpacking
First carefully remove the packaging to prevent the da-
mage of the outside of the stretcher support.
1. Transport with a crane (high load)
· Thread tapes through the upper platform for its trans-
port (as shown in graphs)
· Transport the load level following all the precepts and
regulations for the transport of suspended loads.
2. Transport with a forklift
· Place a pallet or a fl at surface under the bench and
transport it transversely.
· Do not load the bench directly on the forklift without
a pallet or a fl at support surface.
· Do not load the bench longitudinally on the forklift if
a suffi
ciently long base is not available.
· Every bench has been thoroughly inspected leaving
the factory. To ensure that it hasn’t been damaged du-
ring the transport, it is requested to carefully examine
the interior and exterior, and in case of fi nding any da-
mage, communicate immediately to the installer.
· The bench should be levelled for an optimum perfor-
mance.
02
INSTALLATION
TRANSPORT WITH A CRANE
FIX THE TAPES TO LEVEL THE LOAD WEIGHT
TRANSPORT WITH A FORKLIFT
USE ALWAYS A FLAT SUPPORT SURFACE
