Promax PROLINK-4C, Manual

Page: 208 / 334

USER’S MANUAL. PROLINK-4C
Page 88 02/2003
It is possible to associate a specific measurement configuration with the
execution of a previously edited DiSEqC program (see ‘4.9.4.18 DiSEqC Commands
Generator’).
4.12.1 Storing a Measurement Configuration (STORE)
The process of storing a measurement configuration is the following:
1. Select the configuration you want on the PROLINK-4C (freq./channel, band,
etc.).
2. Press key [25] until the monitor displays the STORE screen. Check the
configuration parameters. Then turn the rotary selector [4] to the memory
number that you wish to store the configuration in (from 1 to 99). This number
corresponds to the column headings of the Datalogger function.
If a configuration is stored in a memory location already containing information,
that data will be lost.
3. (Optional) If you wish to assign a name to a memory position press key
[31], the fist character of the name will blink, turn the rotary selector [4] and the
different characters will appear in the first position of the configuration name.
When you have chosen the first character press the rotary selector again [4] to
automatically move on to the second character. Repeat the process for a
maximum of four characters.
4. (Optional) A memory position may be assigned to the name of a previously
edited DiSEqC program, thereby associating it with the execution of the
memorised measuring configuration.
Whenever it is established a satellite configuration will appear the DiSEqC
parameter. In order to activate it, accede by means of the key [31] and
pressing the rotary selector [4] to view the list of edited programs (See section
‘4.9.4.18 DiSEqC Command Generator') and select the program to execute.