June 2021
21
6
SPECIFICATIONS
Specifications
CompactMax-1
SATELLITE INPUTS
4 satellite inputs
LNB
Typical LO frequencies
9750 MHz, 10600 MHz
Supply
Ex13 (vert.pol.)/+18 V (hor.pol.), 5 W each satellite input (max.)
22 kHz signalling
Low/high frequency band
Indicators
Over/under load/current and malfunction
IF frequency range
950 MHz to 2150 MHz (LNB LO freq ±downlink freq)
Input power range
–70 to –20 dBm typ., –50 dBm nominal, –5 dBm max
Input Impedance
75
Ω
Input return loss
> 10 dB
Noise figure
14 dB maximum
DVB-S
Up to 62 Msymb/s
DVB-S2
Up to 45 Msymb/s
DVB-T OUTPUTS
8 DVB-T outputs
Carrier frequency
47 MHz to 858 MHz in 1 kHz steps
Output level
–20 dBm ± 1 dB, 50 ohms
Output attenuation
0 to 30 dB in 0.1 dB steps
MER
38 dB minimum, >40 dB typical
Channel bandwidth
8, 7, 6, 5 MHz with selectable spectral inversion
FFT size
2k only
Guard Interval
1/32, 1/16, 1/8, 1/4
Constellation
QPSK, 16QAM, 64QAM
Code Rate
1/2, 2/3, 3/4, 5/6, 7/8
CONDITIONAL ACCES
Two Common Interface DVB-CI compliant slots
TS PROCESSING
Selection of arbitrary number of services from the received TS (bit rate of the
input services selected < DVB-T output bit rate).
NULL packet deletion and PCR restamping.
Regeneration of the PAT, PMT, SDT, NIT tables.
User-defined NID, ONID, Network Name, LCNs with associated private data
specifier, Service Name, Provider Name and TS ID.
REMOTE CONTROL
1000 Mbps Ethernet connector to access a webserver
User-defined IP address
MECHANICAL FEATURES
Dimensions
430 x 43 x 260 mm W x H x D
Weight
2.85 kg
Size
4,807 cm
3
POWER SUPPLY
110 – 230 V AC
OPERATING
TEMPERATURE
From 0 to 45
º
C
NOTE:
Equipment specifications are set in these environmental operating conditions. Operation outside these
specifications are also possible. Please check with us if you have specific requirements.
Packing Recommendations
You should retain all packaging materials on a permanent basis if necessary to return the equipment to the
Technical Assistance Service.
