Working with PC and PDA devices
The Bluetooth™ headset can be also connected to a PC or PDA device as well.
Please refer to your PC or PDA’s user manual.
Pairing with USB computer Bluetooth™ dongle
(sold separately)
Stereo music play mode:
a) Insert the USB dongle into computer’s USB port. Place the CD into
computer’s CD-ROM. Install the SW, then restart the computer.
b) Pairing
First step: Plug the USB dongle into the computer’s USB port→enter into
pairing status→red,blue lights flash alternately.
Second step: Headset into pairing state (red& blue lights flashing alternately).
Third step: Start-up“My Bluetooth™”in the computer, search the Bluetooth™
device then you can find the “proHarmony.2” in the equipment list.
Fourth step: Choose“proHarmony.2” in the list, input the Pin-Code “0000”.
(Note: “0000” is the fix pairing Pin-Code for Bluetooth™ headset.)
Fifth step: Pairing successfully,red & blue light flash slowly(around 1
time/second).
Note:
If the Bluetooth™ headset isn’t on pairing status,the USB Bluetooth™
dongle cannot search the headset. Please set up the headset on pairing status
then begin to use the USB Bluetooth™ dongle to search.
Start-up the headset after pairing successfully,start-up the computer’s media
player to play music.
a Press S3 to previous song.
b Press S2 to next song.
c Press S1,music stopped,press S1 again,music played.
