1. Charge Panorama-10 using the power adaptor provided.
2. Orange LED turns ON during charging and turns Green once the device is fully
charged.
3. When Panorama-10 is low on power a low battery pop up will appear on the
screen.
Charging Panorama-10
1. Turn on the projector by toggling and holding the power switch for 3 seconds.
2. Turn off the projector by toggling and holding the power switch for 3 seconds.
3. You may project your media on any given surface. The projection will come up
automatically. However, for the best quality projection is best if you find a light
colored wall (preferably smooth and white) and place the Panorama with its
lens facing the location. You can watch media up to 170’’.
Powering on/off Panorama-10
1. Slide the Focus slider on the Panorama-10 to fine-tune the output media.
Adjusting the Focus
Operation Instructions:
English
7
