Promate FM II User Manual Download Page 6

1. Channel key: Set the frequency after selecting the frequency directly by  

     number key.

2. FL+/ FL- key: change the playing folder one by one.

3. CH+/CH- key: Adjusting the frequency with 0.1MHZ by short press, press and  

     hold to adjust frequency quickly.

4. PREV/NEXT key: Select previous or next song.

5.  +/- Key: Volume Turn up or Turn down.

6. PLAY key: Play or Pause by short press. Long press to select circulation mode.

7. Number key: Select song by figure under normal playing state, Select the

    Frequency directly by press the number key first, then press the CH key to  

    confirm.

8. EQ key: EQ optional, E1~E8

    (E1: Normal, E2: Rock, E3:Pop, E4:Classic, E5:Soft, E6:Jazz, E7:DBB, E8:SRS)

Precautions

Please read this User Guide carefully before using the product.

The contents herein may be changed to deliver the better services to the 

end-user. To keep the perfect performances of the product, never use it in cold, 

hot, dusty or moistened areas or places, especially in the following conditions: 

1. Moist or underwater conditions.

2. Conditions near the heater or high-temperature service.

3. Conditions with direct sunshine.

4. Conditions with apt falling.

5. Never dismantle this product without due permission, otherwise it may  

    nullify the warranty clauses.

6. Operation voltage for the device is 12V~24V. Too high or too low voltage  

    could damage the FM11.

7. For safety purposes, please insert the USB flash disk or memory card before  

    you plug the FM11 into the car socket.

8. Frequency of the car FM tuner should be the same as that of the FM11.

9. Do not pull out or insert a USB flash disk or memory card while the device is

    being powered by the car cigarette lighter. If you want to, remove the FM11

    from the socket first and insert or remove the disk or card before you    

    re-power the FM11.

Troubleshooting

If you cannot connect the headset with your phone:

• Ensure that the headset is charged, switched on, and paired with a Bluetooth®  

   mobile phone.

• Ensure that the Bluetooth® function is activated on your phone.

• Check that the headset is within 10 meters (30 feet) from your phone and that  

   there are no obstacles between the headset and the phone such as walls or  

   other electronic devices.

5

Reviews: