Operation Instructions:
1. Turning the blueGear On/Off
• Switch the power button to the “On” state. The Blue LED will flash thrice to
indicate that the headset is switched on. You will also hear a prompt “Power On”.
• Switch the power button to the “Off” state. The Red LED will flash thrice to
indicate that the headset is switched off. You will also hear a prompt “Power Off”.
2. Pairing blueGear with your Bluetooth® device
You are required to pair blueGear with your mobile phone once before using it.
• Press and hold the Multi-function button for 5 seconds until the blue LED
and red LED start flashing alternately to enter pairing mode.
• Activate Bluetooth® on your mobile phone.
• Set your phone to discover ‘blueGear’ and follow the instructions.
• If your phone asks for a passkey or PIN code, confirm with ‘0000’ (4 zeroes).
When the phone and blueGear are paired and connected, blue LED flashes twice.
3. Pairing blueGear with a second Bluetooth device(Multipoint Pairing):
• Follow the above instructions to pair the blueGear with the first device.
• Press and hold the Multi-function button for 5 seconds until the blue LED
and red LED start flashing alternately to enter pairing mode.
• Activate Bluetooth® on your mobile phone.
• Set your phone to discover "blueGear" and follow the instructions to pair
with the second device.
• Find the "blueGear" in the first device and pairing again.
• Two bluetooth device both connected now.
• If your phone asks for a passkey or PIN code, confirm with ‘0000’ (4 zeroes).
When the phone and blueGear are paired and connected, blue LED flashes twice.
4. Answering a call:
•
With one phone connected
• Short press Multi-Function button once to answer an incoming call.
4
Summary of Contents for blueGear
Page 7: ......
