Promaster MyMuvi, Instruction Manual

Page: 9 / 28

7
2. Basic operation
2.1 Install battery
Press and slide the battery cover as shown. Insert the lithium battery. Be sure to observe
the correct polarity of the battery terminals. Close the battery cover.
2.2 Charge Battery
1. Power off the camera.
2. Connect the camera to the computer USB port or an optional USB AC power supply to
charge the battery.
3. During charging, the busy light will come on. The light will go out when the battery is fully
charged.
2.3 Insert SD/MMC/SDHC card
Insert the SD Memory card into the SD/MCC/SDHC card slot. Push it down until the card