Installing the batteries
1.
Turn off the power switch on your camera and ensure that the Control Lock (16) is in the “L” position. Turn the battery chamber latch (4) counter-
clockwise to open the battery chamber door.
2.
Remove the battery holder from the grip. The EN-EL15 battery holder (13) comes pre-installed when shipped.
3.
For EN-EL15 Li-ion Batteries: Matching the indentations on the battery with the EN-EL15 holder, Press the battery down and slide it in the direction of
the arrow until the power terminals click into place.
4.
For AA Batteries: Place eight AA batteries of the same type into the AA battery holder, ensuring that they are in the correct orientation. Mixing battery
types, or using fresh and used batteries together could result in deteriorated performance or damage to the grip.
5.
Insert the battery holder into the grip. Close the battery chamber and then turn the latch clockwise to lock. Turn on the camera and check the battery
level in the control panel or viewfinder.
One Year Unconditional Warranty
If for any reason, this ProMaster product fails within ONE YEAR of the date of purchase, return this product to your ProMaster dealer and it will be
exchanged for you at no charge. ProMaster products are guaranteed for ONE FULL YEAR against defects in workmanship and materials. If at
any time after one year, your ProMaster product fails under normal use, we invite you to return it to ProMaster for evaluation.
Specifications
Power Sources
1 x EN-EL15 or 8xAA batteries(LR6, HR, FR)
Compatible Cameras
Nikon D800/D800E
Replacement for
Nikon MB-D12
Operating Temperature
32~104
°
F/ 0~40
℃
Dimensions
Approx. 5.95x1.97x3.19”/151x50x81mm
Weight (without batteries)
Approx.10.9 oz./310g(including EN-EL15 battery holder)
*
All the trademarks are the property of their respective owners
*
Specification and design are subject to change without notice
Code 3697
Made in China
WWW
.
PROMASTER
.
COM
|
FAIRFIELD CT
06825
