Thank you for choosing the ProMaster Vertical Control Power Grip. To ensure proper operation, please read this manual thoroughly before using this
product.
This grip is specially designed for the Canon EOS 5D Mark II DSLR cameras. It is equipped with an alternate shutter-release button, AE-L/AF-L button,
multi selector, and main and sub-command dials for shooting in a vertical position. This power grip can hold two LP-E6 rechargeable Li-ion batteries or can
use six AA batteries (alkaline, Ni-MH or lithium) to extend your shooting time.
Caution
1.
This product should only be used with compatible devices specified in this instruction sheet.
2.
Only use with the batteries and battery holders recommended.
3.
Cover the power terminals with the contact cap when not in use. This prevents electrical shorts caused by metal objects touching the terminals.
4.
When the battery holder is removed from the grip, remove the batteries or place the holder in a container to prevent electrical shorts caused by
contact with other metal objects.
5.
The memory card access lamp may light up when this grip is mounted or removed from the camera. This is part of the normal operation.
6.
The control lock is not a power switch; use the camera power switch to turn the power on/off.
7.
The battery level may not display properly if batteries are inserted before attaching the grip to camera.
8.
Remove batteries from the grip when not in use for an extended period.
9.
Do not disassemble or repair this product yourself. Doing so will void your warranty.
10. Avoid water or extreme humidity and be sure to store in a cool, dry location..
11. Do not dispose of in fire or extremely high temperature environment.
12. Keep the product or parts away from children to avoid hazard from swallowing.
Part Names
Attaching to your camera
1.
Turn off the power on your camera and the ON/OFF switch (10) of the grip. Open the battery chamber of your camera and remove the battery and
battery chamber door per the instructions provided with your camera. The battery door should be stored in the camera battery door storage slot (8) on
the grip to prevent loss.
2.
Remove the protective cover (6) from the power grip and insert the power connection (7) of the grip into the cameras battery chamber.
3.
Turn the attachment knob (3) and securely fasten the battery grip to the tripod mount on your camera.
Code 3641
Replaces Canon BG-E6
Compatible with Canon 5D Mark II
