2016 & 2017 PROMASTER REAR SPEAKER
INSTALLATION
Optional AM, FM, CD, Nav, Sirius/XM, UConnect 5.0 Radio -
RA2
ProMaster vans equipped with the RA2 radio are shipped from the factory with the
rear speakers turned off as the vehicle does not come equipped with rear speakers. If
the speakers were turned on with no speakers connected, diagnostic routines in the
radio would set rear speaker faults. If rear speakers are added, they must be enabled by
accessing the car layout screen in alternate engineering menu in the radio.
NOTE:
To eliminate the setting of fault codes, rear speakers should
only be enabled AFTER the rear speakers have been properly
connected to the vehicle electrical system.
NOTE:
Do not attempt to make any other changes to radio
configurations while in the alternate engineering menu.
After the speakers are properly connected, perform the steps outlined on the following
pages to enable the speakers. Once the steps are correctly performed, the speaker fade
control will now be visible in the audio control menu of the radio and the rear speakers
will function.
1.
Press the
RADIO
and
MEDIA
buttons then, shortly after that, while still
holding the
RADIO
and
MEDIA
buttons, press the
BROWSE/ENTER
button.
Hold all for approximately 5 seconds. The following screens will appear.
Page 8 of 14
