Promaker PRO-TR300, User Manual

Page: 4 / 24

4
NOTE: BEFORE THE TOOL IS
USED FOR THE FIRST TIME, READ
THIS INSTRUCTION MANUAL
AND KEEP IT FOR FUTURE
REFERENCE.
DETAILED SAFETY REGULA TIONS
WARNING: Safety regulations must
be observed, when the device is
operated. This instruction manual and
general safety information should be
read for your own and bystanders
safety, before the tool is operated.
This instruction manual should be kept
for future reference.
REMEMBER: The operator or user is
responsible for accidents or hazards
occurring to other people or the
environment.
• When the tool is operated, work
safety and hygiene regulations in force
should be strictly observed.
• Before operation is commenced,
check the unwound power cord for
damage or wear.
• Before connecting to the power
source, always make sure the supply
voltage is compatible with the value
specified on the nameplate of the tool.
• The tool can be connected only to
an electrical system equipped with a
differential current protection that will
cut the power off when earth leakage
current exceeds 30 mA in less than 30
ms.
• Do not allow the tool to be operated
by children and people not familiarized
with the instruction manual.
• Before you begin working, make
sure there is enough free space and
proper lighting over the work station.
• Check the workpiece for correct
fastening.
• Do not use the tool in rooms with
explosive atmospheres.
• Make sure that ventilation holes of
the tool are passable and kept clean
during operation.
• Before cleaning, the tool must be
disconnected from power supply.
Clean the tool using a brush.
• Always use eye and ear protection.
• It is also recommended to use
personal protection equipment, such
as dust mask and protective apron.
• Do not attempt to repair the tool on
your own.
• All repairs should be performed
by a qualified person only, or in an
authorised service centre, using
original spare parts.
NOTE! The tools is intended for
indoor works.
Despite using the construction,
which is safe by design itself,
protection means and additional
safety features, there is always
a residual risk of injuries during
operation.
CONSTRUCTION AND APPLICATION
The drill and driver is an electric