Page 4
TM951334-5
All 1-Wire devices, including iButton devices, contain an 8-byte unique registration
number.
The computation begins with the MSB of the 64-bit,
This 1-Wire Data consists of an 8-bit CRC, a unique 48-bit serial number and an 8-
bit family code.
Baud Rate : 19200,N,8,1
The start character is factory defined as an ‘STX’ (02 HEX). This is followed by 8
Hex characters of data .
The CR\LF characters serve to bring the received screen text back to the left hand
side and on the line below after the data bytes have been sent.
The ‘ETX’ (03 HEX) character denotes the end of the current transmission.
Baud Rate : 19200,N,8,1
COMMAND
COMMAND
DESCRIPTION
Host to MR2S
“J1”
GLED ON & STOP FLICKER
“J2”
GLED OFF & STOP FLICKER
“J3”
RLED ON & STOP FLICKER
“J4”
RLED OFF & STOP FLICKER
“J5”/”J6"
TREBLE SHORT /LONG BEEP PLUSE
“J7”/”J8"
MEDIANT SHORT /LONG BEEP PLUSE
“J9”/”JA”
BASS SHORT /LONG BEEP PLUSE
“JH”/”JM”/”JL”
TREBLE /MEDIANT /BASS BEEP CONTINUE
“JO”
BEEP CONTINUE OFF
“JG”
FLICKER GLED
“JR”
FLICKER RLED
“V”
VERSION
“D”
DEVICE NAME
Baud Rate : 19200,N,8,1
