Technical And Operational Description
- 4 -
Indicators Information
DT105X with COMMAND control
DT105X with RTS/DTR signal control
PB105
STATUS
POWER ON
READY
OPEN CASH DRAWER
COMMUNICATION
BUZZER
BEEP-BEEP
X
BEEP
X
RED LED
BLINK 2 TIMES
OFF
ON
OFF
GREEN LED
BLINK 2 TIMES
ON
OFF
BLINK
STATUS
READY
OPEN CASH DRAWER
X
POWER ON
BUZZER
X
BEEP
X
BEEP-BEEP
STATUS
READY
ACTION
GREEN LED
OFF
ON
BUZZER
X
BEEP
COMMUNICATION
X
O
X
X
GREEN LED
ON
OFF
OFF
BLINK 2 TIMES
RED LED
OFF
ON
OFF
BLINK 2 TIMES
RTS/DTR
H/L
L/H
L/L , H/H
X
Introduction
This manual provides basic information about the Models of DT105U (DT105R)
Universal Serial Bus ( RS232 Serial Port) Cash Drawer Triggers, and the PB105
Printer Beeper.
The DT105U(DT105R) Cash Drawer Trigger is designed to provide USB (RS232)
interfacing to the cash drawer. This allows cash drawers, previously connected
to POS printers and cash registers, to be connected to a USB (RS232) port of
the computer.
The DT105U USB Trigger uses a Virtual Serial Port Driver, making it appear to
have the software like a standard RS232 Serial Port. This way the existing POS
Software can communicate with the USB Cash Drawer Trigger as if it were
connected to a Serial Port. A unique serial number is assigned to each USB
Trigger Module and the Driver Software will assign the next available Serial Port
to each device it recognises ( multiple Triggers can be used on one PC).
The DT105U(DT105R) module is designed to accept modular cash drawer
connectors.All standard POS printer drawer open commands are used to trigger
the device and the ESC/POS status command is also available to read the
drawers open or closed condition.
*
DT105U
is to open the cash drawer when it receives the trigger command
or the RTS/DTR signal control from the computer via USB port.
*
DT105R
is to open the cash drawer when it receives the trigger command
or the RTS/DTR signal control from the computer via RS232 port.