Promac BX-834, Instruction Manual, Page: 7 / 27

18. It is prohibited to move the table when machine in operation.
19. It is prohibited to operate this machine beyond the limit of its capacity,
20.Refer to this instruction for details.
21. It is prohibited to insert one's hand or finger into the hole of working piece in operation.
22. It is prohibited all visitors and children should stand near work area while the machine in operation.
23. It is prohibited to wear gloves, neckties, ring, bracelet and loose clothing in operation.
24. It is prohibited to use plastic and wooden working.
25.Check again before switch on power,
A-Make sure the power voltage is for the machine.
B- Make sure the machine is completely assembled and installed
C- Make sure chuck, working table, working piece are completely secured or tightly fixed.
D- Make sure the chuck key is removed from chuck.
E- Make sure drill bit or tooling need to be fixed in the chuck.
26.Switch off power at once;
A-When fixed or removed working piece.
B-When the normal maintenance, service , adjustment or repairing.
C-When the operator leave the machine.
D-When corrected work table adjustment and depth position.
E-When change or remove the drilling bit or tooling.
27. Working temp.5 --- 40
℃
,Humidity 40--- 50,Elevation 0 ---1000 M
Storage temp -25--- 55
℃
28.Operate location diagram for reference.
Diagram 1 Diagram 2
MODEL Ultimate loading
BX-834 70 kg
BX-834V 70 kg
BX-840VB 50 kg
5