Promac 347V, Operating Instructions And Parts Manual

Page: 10 / 22

10
Operation
Manual Cutting
When manual cutting slacken the set
screw G of (Fig 5) and push the arm H
of (Fig 5) to suitable position. Then
tighten the set screw G of (Fig 5).
To start the machine switch I of (Fig 6)
to ON.
Press the position trigger K of (Fig 7)
while conducting manual cutting.
To stop the machine switch J of (Fig 6)
to OFF when cutting finished.
Fig 5
G
H
Fig 6
I
J
Fig 7
K