background image

Prolon Control Systems 

 

 

Lonbox PSW5000 

Users Manual 

Page 4 

The following table documents the different configuration modes that a digital input can be used in. 

SWA_ACTIVE_ON 

Used for toggle switch types 

When input is active the configured on level is transmitted. 

When input is passive OFF = 0% 0 is transmitted 

SWA_ACTIVE_OFF 

Used for toggle switch types 

When input is active OFF = 0% 0 is transmitted. 

When input is passive, the configured on level is transmitted. 

SWA_ON_LEVEL 

When activated the configured on level is transmitted. 

SWA_ON_LAST 

When activated, the last known on level is transmitted. 

SWA_OFF 

When activated, OFF 0% 0 is transmitted 

SWA_AUTO 

When activated an invalid switch value is transmitted 127.5% -1, 
this is used to reset manual override of a light controller. 

SWA_DIM_UP 

When pressed and as long as the switch is held active the 
switch level is dimmed up using configured step value. 

SWA_DIM_DOWN 

When pressed and as long as the switch is held active the 
switch level is dimmed down using configured step value. 

SWA_DIM_UP_ON_LEVEL 

If clicked configured on level is transmitted. 

If held active the switch level is dimmed up using configured 
step value. 

SWA_DIM_UP_ON_LAST 

If clicked the last known on level is transmitted. 

If held active the switch level is dimmed up using configured 
step value. 

SWA_DIM_DOWN_OFF 

If clicked, OFF 0% 0 is transmitted 

If held active the switch level is dimmed down using configured 
step value. 

SWA_DIM_UP_DOWN_OFF_ON_LEVEL 

If clicked either OFF 0% 0 or configured on level is transmitted. 
If held active the switch level is dimmed up or down using 
configured step value. 

SWA_DIM_UP_DOWN_OFF_ON_LAST 

If clicked either OFF 0% 0 or last known on level is transmitted. 
If held active the switch level is dimmed up or down using 
configured step value. 

SWA_TOGGLE 

Toggles the switch level transmitted between off and configured 
on level. 

SWA_SETTING_ON 

When activated sends SET_ON with a setting level as 
configured in on level and a rotation of 0 (zero) 

SWA_SETTING_OFF 

When activated sends SET_OFF with a setting level as 

Summary of Contents for Lonbox PSW5000













Reviews: