Prology DMD170, Service Manual, Page: 6 / 31

PREPARATIONS
1-6
Wiring Diagram
Using the ISO Connector
Connector Connector
2. For connections without the ISO connectors, check the wiring in the vehicle carefully
Cut the connector, connect the colored leads of the power cord to the car battery,
before connecting,
incorrect connection may cause serious damage to this unit.
as shown in the colour
code table below for speaker and power cable connections
1.If your car is equipped with the ISO connector, then connect the ISO connectors as illustrated.
Amplifier
Ground Lead
Left Speaker
(Front)
Left Speaker
(Rear)
Right Speaker
(Front)
Right Speaker
( ) Rear
White/
Black
Stripe
White Gray/
Black
Stripe Green/
Black
Stripe
Gray Green Purple/
Black
Stripe Purple
Black
Blue
Motor/Electric Antenna relay control Lead
Amplifier relay control Lead
ISO Connector
Connector
Original wiring
Modifi ed wir ing
Red
Yellow Yellow
Red
Red
Yellow Yellow
Red
R(Red)
L(White)
Rear Line-out (Gray)
R(Red)
L(White)
Front Line-out(Brown)
For some VW/Audi or Opel(Vauxhall)
car models, you may need to modify
wiring of the supplied power cord as
illustrated, or else the memory of the
unit may be lost after you power off.
Contact your authorized car dealer
before installing this unit.
Ignition key
+12V DC When ON/ACC
To car b)
Cont12V DC
Yellow
Red
Filter Box
Antenna
Fuse 15A
R(Red)
L(White)
Aux-in
( ) Green
( ) Yellow
Video-out
Subwoofer out