Prolitec AirQ AQ 1270 TT, Original Instructions Manual

Page: 21 / 36

AQ/PS/RZ 1270 21 Chapter 9 INSTALLATION: DIffusion via HVAC System
Fig. 16
CORRECT INCORRECT
Appliance Installation
1. The appliance is wall-mounted. Place the appliance onto the desired location on the wall or AHU
and ensure that it is level.
2. Fasten the appliance to the wall or AHU using necessary screws.
3. Connect the power cord to a junction box or attach an AC plug to the cord and connect to a
nearby outlet. Open the enclosure door and unscrew the aluminum cap of the waterproof collar
located on top of the appliance enclosure. Remove and set aside the grommet (
Fig. 1 ).
4. Assemble the Plume Connector:
• Insert washer and insert assembly, threaded side first, through hole on top of the appliance
( Fig. 17 ).
• Insert another washer and secure with nut. Use pliers to ensure a watertight seal ( Fig. 18 ).
• Push the tubing assembly over the barbed fitting ( Fig. 19 ).
• Important: Secure with cable tie ( Fig. 20 ).
Thread
Fig. 17 Fig. 18 Fig. 19 Fig. 20
9