PROLiNK
®
PWH2004 User Manual
www.prolink2u.com
Revision 1.0 (Aug’09)
30
Access Policy
Policy
Set access control policy of the stations. Select Disable, Allow or Reject form the pull-
down menu.
Add a station
Mac
Enter a station MAC in the blank field. The maximum rule count is 8.
4.6.3.
WDS
Making a connection between access points by using WDS function, please follow below steps.
4.6.3.1.
The APs must support WDS function.
(To set WDS must use the same wireless product (the same model will be better); due to
different wireless products might support different WDS settings. Thus, it is suggested to use the
same wireless products that support WDS function.)
4.6.3.2.
To set the same SSID on the APs.
4.6.3.3.
To set the same channel on the APs.
4.6.3.4.
To set the same Wireless MAC address (BSSID) on the APs.
4.6.3.5.
To set same security (WEP or WPA) on the APs.
Select the mode from the pull-down menu, Disable, Bridge Mode or Repeater Mode. (Default WDS mode is
Disable.) If the users would like to set up the WDS function, please go to Wireless
f
Basic to set up APs that
should use the same SSID(case-sensitive) and Channel , then go back to Wireless
f
WDS to enter Wireless
MAC address(BSSID) of each other to make the WDS connection.
Step 1:
Setup the same SSID and Channel on wireless APs.
Step 2:
Enter Wireless MAC address (BSSID) to each other.
