background image

4

Section One - Introduction

The Hurricane 9000S provides Full rate (ANSI and G.DMT) as

well as G.lite ADSL standards line support, and can be con-

nected to PC through Ethernet  or USB . This product sup-

ports bridge feature set  for the integration of ADSL service

into corporate or home LAN and WAN.

1.1 System Requirements

Before connecting the Hurricane 9000S to your  PC, make
sure your sysytem is equipped with the Ethernet NIC card or USB
port  and TCP/IP protocol.

1 .2 Features Summary

ADSL Compliance

Compliant with ADSL standards:

ANSI T1.413 Issue 2, ITU G.dmt (G.992.1)

 and  G.lite (G.992.2).

ADSL over POTS (Annex A) and ADSL over ISDN (Annex B)
DMT modulation and demodulation
Full-rate adaptive modem
Maximum downstream rate of 8 Mbps
Maximum upstream rate of 1 Mbps
Tone detection for low power mode
Supports splitterless ADSL implementation

Supports Dying Gasp (optional)

ATM Protocols

WAN mode support: PPP over ATM  and over Ethernet. (RFC 2364/2516)
LAN mode support: bridged/routed Ethernet over ATM (RFC 1483) and
Classical IP over ATM (RFC 1577)
ATM Forum UNI 3.1/4.0 PVC
Up to 8 VCs (Virtual Circuits)
ATM SAR (Segmentation and Reassembly)
ATM AAL5 (Adaption Layer type 5)

OAM F4/F5

Section One: Introduction

Summary of Contents for Hurricane 9000S





































Reviews: