PROLiNK Hurricane 5200C/5201
ADSL2+ Modem / Router
User Manual
Page 9 of 59
4 Software
Configuration
When you switch ON the modem/router, the system will boot up and connect to ADSL
automatically. The system provides PVC for bridge test by default. These default
configurations for the system are listed as below.
z
LAN IP address:
192.168.1.1
; Net Mask:
255.255.255.0
z
UART setting: 115200bps, 8 bits, no parity, 1 stop bit, no flow control.
z
VPI/VCI for ATM:
0/35
z
ADSL Line mode: Auto-detect.
You can change the settings via WEB browser. The following sections will describe the
set-up procedures.
Please configure your PC’s LAN port as followed:
z
IP address:
192.168.1.xxx (e.g. 192.168.1.10)
z
Net Mask:
255.255.255.0
Then, access the Web Console using the steps below:
z
Start your web browser.
z
Type the LAN IP address of the modem/router on the address bar of the browser. The
default IP address is 192.168.1.1.
