3.
SPECIFICATIONS
Model
PRO700
Capacity
650VA
Voltage Range
140 – 300VAC ± 5VAC
Input
Frequency
> 40 Hz
Phase
GND
Voltage Range
11% - 17%
Output
Battery Mode
230VAC ± 10%
Frequency
50Hz ± 1Hz (Battery Mode)
Simulated Sine Wave (Battery Mode)
Waveform
Sine Wave (AC Mode)
Transfer Time
2ms typical
Type & Number
12V8.2AH – 1pc
Battery
Backup Time
8 – 20 minutes depending on load
Recharge Time
90% Capacity after 8 hours
Short Circuit
Protection
Line mode – Fuse & software protection (CPU)
Battery mode – Software protection (CPU)
Protection/
Monitoring
Surge Protection
Yes
Alarms Audible
&
Visual
Over Temperature
Protection
>75ºC Alarm will sound
>85ºC the system will shutdown
Line Mode
: 100-120% 5 minutes change to fault mode
Overload
Protection
>120% change to fault mode immediately
Battery Mode
: 100 – 120% 5 secs shut down;
>120% shut down immediately
Intelligent Battery
management
Prevent overcharging of battery.
Protect battery and prolong battery life.
Interface NA
9P D-Type
Connector
NA
Interface
Software (optional)
NA
Noise <40dB
General
Temperature
0ºC - 40ºC
Humidity
0% - 95% relative humidity
Power Factor
Up to 0.7
Built-in AVR
Full AVR (3 Steps)
*Specifications are subject to change without prior notice.
4
Summary of Contents for EnerHome PRO PRO700
Page 1: ......
