4
PARTS
OPERATION
Before first use, it is recommended to operate the kettle for 2 to 3 times following the
instructions below. This will remove any dust or residues remaining from the
manufacturing process.
1.
Remove kettle from power base.
2.
Fill kettle with desired amount of cold water through the spout or the open lid.
•
Open the lid by pressing the lid release button and the
n
lifting the lid upwards.
•
Do not overfill the kettle by exceeding the MAX level.
3.
Close the lid by pressing it down until it clicks into place.
4.
Place the kettle on the power base and insert the plug into the mains socket.
5.
Press the power switch. The water is being heated.
•
The power indicator light will illuminate.
6.
The kettle will switch off automatically when the water boils.
•
The power indicator light will go out.
•
You can stop the boiling process by setting the power switch to “O”.
7.
Lift the kettle from the power base and then slowly pour the boiling water.
NOTE: Use the kettle only when the lid is closed and the filter is in place.
Cut-out for boil-dry protection
If you operate the kettle without water, the kettle will stop heating and automatically
switch off.
If this occurs, allow the kettle to cool before filling with cold water and re-boiling.
Downloaded from www.vandenborre.be
