iPod
Dock the iPod on the top slot of the speaker, control music playback from the iPod. To adjust the volume, press
SELECT and rotate the knob to set the required sound level..
PL 200F also supports the iPhone – however, during iPhone music playback, it automatically stops the music when
receiving a call.
AUX
Connect an external sound source using the 3.5mm stereo jack cable. Rotate the knob to adjust volume. Also adjust
the volume of the audio source device if necessary.
Caution: Do not set the Volume of the input source too high as distortion will occur,
FM
When PL 200F is displaying the frequency, press SCAN- or SCAN+ to manually tuning the frequency (0.1MHz for 1
step). Press and hold SCAN- or SCAN+ to scan the next FM station, PL 200F stops scanning when it finds a station.
Rotate the reel to adjust volume.
When the display shows FM (pressed SELECT on FM mode, or turn the knob clockwise to FM during mode
selection), immediately, rotate the knob anticlockwise one step and press SELECT to do FM auto scanning. PL 200F
stores the scanned station automatically.
To view the stored station list (from auto scan), rotate the reel turn the knob clockwise two steps to enter when the
display shows FM. Rotate the reel to choose saved stations (from P-01 to P-20).
Precaution
-
Do not scratch the speaker diaphragm as it is thin and soft.
-
Power off and remove the batteries or DC supply after use.
-
Do not expose the speaker to liquid, moisture or humidity as it is not waterproof.
-
Do not use abrasive cleaning solvents to clean the speaker.
-
Do not expose the speaker to the contact with sharp objects as this will cause scratches or damages.
-
Do not attempt to disassembly the speaker as it does not contain serviceable components.
-
Keep the speaker out from extreme temperatures or dust.
-
Only use the DC adaptor comes with the speaker.
