Proline PCH465K-U Instructions Manual Download Page 4

50mm mini

50mm mini

50mm mini

50mm mini

560mm

490mm

Safety

4

High temperature protection

The temperature sensor mounted on the radiant electric the temperature inside the cooker 
from time to time. When an excessive temperature is detected, the cooking plate will be 
directly disconnected and stop power output.

Residual heat indicators

After using the hob, waste heat remains in the heating area. The indicator lamp will light
up, warning to be away from the heating area.

Installation

Selection of installation equipment

Drill holes on the table surface according to the sizes shown in the drawing. For the 
purpose of installation and use, a minimum of 50 mm space shall be preserved around 
the hole. Be sure the thickness of the table surface is at least 30mm. Please select
heat-resistant table material to avoid deformation caused by the heat radiation from the 
hotplate.
As shown in Figure (1)

This appliance is not intended for use by persons (including children) with reduced

 physical, sensory or mental capabilities, or lack of experience and knowledge,

 unless they have been given supervision or instruction concerning use of the 

appliance by a person responsible for their safety.

Summary of Contents for PCH465K-U











Reviews: