2
2
9.
10.
Close the dishwasher door securely.
The washing cycle will start.
11.
At the end of the washing programme, the dishwasher will buzz and automatically
stop.
12.
Wait for about 15 minutes before you open the dishwasher door in order to avoid
burns.
1 .
Unload the dishes.
3
The washing cycle will not start if the dishwasher door is left open or not properly
closed.
Do not open the door when the dishwasher is working since hot water may be
ejected, which could cause scalding.
Adding extra crockery
1.
Open the door a little to stop the dishwasher, taking care to avoid the escaping steam.
2.
Place the crockery inside the dishwasher.
3.
Close the door. The cycle will start from the point at which it was interrupted.
Modifying a washing programme in progress
If a mistake was made during the washing programme selection process it is possible to
change the programme.
1.
Open the door.
2.
3.
The new programme indicator light will illuminate.
4.
Close the door
to start the new programme.
If you want to perform a half load wash, press and the corresponding indicator light
will illuminate.
- This function can only be used with the Intensive, Normal, Eco wash, and
90-minute programmes .
- When this function is activated, the dishwasher will automatically reduce the
water and energy consumption and the washing time.
You will hear a beep.
Press and hold P for about 3 seconds.
Repeatedly press P to select a new programme.
Downloaded from www.vandenborre.be
