Proline IH680P-U Instructions For Use Manual Download Page 5

CLEANING THE CERAMIC HOB

Before you begin cleaning make sure that the hob is switched off.

• Remove spillages and other types of incrustations.

• Dust or food particles can be removed with a damp cloth.

• If you use a detergent, please make sure that it is not abrasive or scouring. Abrasive

or scouring powders can damage the glass surface of the hob.

• All traces of the cleaner must be removed with a damp cloth.

• Dust, fat and liquids from food that has boiled over must be removed as soon as pos-

sible.

• If they are allowed to harden they become increasingly difficult to remove.

This is especially true in the case of sugar/syrup mixtures which could perma-
nently pit the surface of the hob if left to burn on it.

• If any of these products has melted on the ceramic surface, you should remove it

immediately (when the surface is still hot) by using a scraper to avoid any permanent
damage to the surface of the hob (available under part no. 103138).

• Do not put articles on the hob which can melt: i.e plastic, aluminium foil, sugar, sugar

syrup mixtures etc.

• Avoid using a knife or other sharp utensil as these may damage the ceramic surface.

• Do not use steel wool or an abrasive sponge which could scratch the surface perma-

nently.

Fig. 3.1

CONTROL KEYS

Do not use a steam cleaner
because the moisture can get into
the appliance thus make it unsafe.

Care should be taken not to damage 

the control keys markings.

Warning: Disconnect the power supply before cleaning.

Summary of Contents for IH680P-U








Reviews: