Control panel
Air vent
Ceramic plate
Air entry
Heating zone selection key
ON/OFF
Timer key
Lock key
Induction hotplate appearance
Power regulating key
iagram of the control panel
1
2
3
4
(1) If the cable is damaged or needs replacing, this should be done by a
qualified technician using the proper tools, to avoid any accidents.
(2) If the appliance is being connected directly to the mains supply, an
omnipolar circuit breaker must be installed with a minimum gap of 3 mm
between the contacts.
(3)The installer must ensure that the correct electrical connection has been
made and that it complies with safety regulations.
(4)The cable must not be bent or compressed.
(5)The cable must be checked regularly and only replaced by a properly
qualified person.
(6).The appliance shall be installed according to national electrical rules.
