Automatic Corkscrew
MANUAL
We recommend that you charge your corkscrew for at least eight hours
before using it for the first time. Please follow the instructions for recharging
below:
The corkscrew is operated by a one simple switch. The switch has two functions.
Press the lower part of the switch to remove a cork from a bottle.
Press the upper part of the switch to release a cork from the mechanism after you
have removed it from the bottle. (See Pic 1)
Recharging your corkscrew
Plug one end of the adaptor cord into the
base of the recharging unit and the other
end into a mains socket. Place the
corkscrew into recharging unit, ensuring
that it is firmly in position and is fully
engaged with the recharging connectors.
It will take approximately 6-8 hours to
r e c h a rg e y o u r c o r k s c r e w. W h e n t h e
corkscrew is fully recharged it can be used
to open approximately 30 bottles.
WINE OPENER
WINE OPENER
SWITCH
CHARGING STAND
CHARGING STAND
LED LIGHT
LED LIGHT
ADAPTOR
ADAPTOR
Model: TB10
How to operate the corkscrew
Before using the corkscrew, you must remove
any foil from the top of the bottle using the
foil cutter provided.
1. Place the corkscrew on the top of the wine
bottle. Ensure that it remains as upright as
possible at all the times. If you hold the
corkscrew at an angle to the bottle, it will not
remove the cork properly. (See Pic 2).
(Pic.01)
up
down
2.Hold the corkscrew firmly and depress the lower
part of the switch. The corkscrew spiral will turn in a
clockwise direction and enter the cork, then
gradually remove it from the bottle. When the
corkscrew mechanism stops, the cork has been fully
removed from the bottle.
(Pic.02)
1
GB
